This will be the first test in a series of tests that we will do with the DRT “Dynamic Research Technologies” Terminal Shock series. In This video we shoot the 9mm hollow Point through a 16″ Clear Ballistics block. We use a Glock 19, and a Kel-Tec Sub 2000 for the test, both fired and about 3 yards. We also fire the DRT Terminal Shock rounds through six layers of denim. We were very impressed with the performance of the ammo, both in penetration and wound channel. The results we got were exactly what DRT claims in its advertisements, which we really liked. This ammo is best suited for CCW, and home defense for the damage it causes, and it’s ability not to over penetrate. We will be doing more test with this ammo, as well as some other calibers from DRT Ammunition. If you would like to learn more about DRT, and the different kind of ammunition they offer please visit their website here:
In our testing of the Magpul D60 drum magazine, we found the D60 to be a little hard to load, but it seemed to function in just about everything we put it in, other than the guns stated in the video. The Magpul D60 can be loaded and stored away without any ill effects, this is a plus considering that it can be a pain to load. We like the D60 given Magpul”s reputation for making quality products. The D60 retails for $129, but you can find it cheaper if you look around. We have to give Magpul high marks on this one. If you want to learn more about the Magpul D60 click the link: Here
Here is our review of the Slide Fire SSAR-15 MOD Shock. LIke the the Slide Fire stock before it is a blast to shoot, especially with todays cost of a true full auto m16! it is just about as easy to keep on target as a regular m16 and just about as much fun as one too! if you can afford the ammo and want to have a good time with your rifle, and put a smile on everyones face that shoots it, than the Slide Fire SSAR is for you! Click the link to learn more about the new SSAR-15 stock from Slide Fire: Here
The Silencerco Salvo 12 shotgun suppressor is a very adjustable12 gauge shotgun silencer. The Salvo is able to transform form a 12″, 10″, 8′, or even a 6″ suppressor, with the addition of some shorter rods from Silencerco. With the Salvo attached the shotguns were much quieter of course, and had greatly reduced recoil, as one would expect from a $1,400 shotgun silencer. The Salvo is easy to install on your shotguns, by just adding a choke adaptor. We were very impressed with the Silencerco Salvo 12 suppressor, it was very comfortable one the ears and the shoulder. if you shoot a shotgun a lot, or if you hunt with a shotgun, and can afford the price tag, the Salvo 12 is for you. To check out the salvo 12 in more detail click the link here.
Here is our video on the OSS ” Operators Suppressor system”. We try out the OSS suppressor on several different guns, including the Boba Fett Tavor. We also do some shooting with the new Magpul D60, and Slide Fire SSAR-15 MOD stock. To find out more about OSS suppressors check them out Here.
Custom Boba Fett Tavor by Blown Deadline & Gear Head Works
Here is the ever popular custom Boba Fett IWI Tavor, done by Blown Deadline and Gear Head Works. In the video we will give you a closer look at this Star Wars inspired masterpiece. You will also see us shooting the Boba Fett blaster with the new Magpul Pmag D60 drum magazine, and an OSS Gen 4 suppressor.
The guys over at Apex Tactical Specialties sent us one of the soon to be released triggers, this time for the ever popular Walther PPQ. The Walther PPQ already has one of the best factory triggers out there for a striker fired handgun. Walther asked Apex if they could do an even better aftermarket trigger for their PPQ pistol. Apex as usual was up to the challenge! The new flat faced forward set trigger doesn’t change the factory trigger pull weight, although many may argue that it does, because of the way the trigger is designed it feels lighter. We seen the most improvement in the triggers travel, which seemed to be significantly decreased from the factory trigger. Another area where the PPQ Flat Faced Trigger shined was in the Reset, and the break, both of these areas seemed greatly improved over stock. After all of the testing we did on the new trigger we don’t have any problems recommending this new trigger to all the PPQ owners out there. if you would like to learn more about the new Apex Flat Faced Forward Set Trigger for the Walther PPQ check out Apex’s website Here
After spending just a little over a year with our Glock 19 done by MOD1 Firearms, we are happy to report that the gun has held up amazingly well in that time! The gun has been my daily carry for almost everyday of that year, and shows very little signs of wear to the slide, or the texturing. We have put quite a few rounds through the gun without any real issues to date, we couldn’t be happier with the work that MOD1 Firearms has done! We look forward to many new projects with MOD1 in the future. If you would like to have MOD1 Firearms do any work for you, check them out Here for more information.
CZ Scorpion Paddle Magazine Release By Gear Head Works
Check out the new paddle mag release for the CZ Scorpion Evo 3 S1 from Gear Head Works. We wanted to check it out and see how much it would improve on the OEM release. In this video we show how to install the new Paddle Magazine release, and let you know what we think the advantages are. The new release is made out of aluminum, and is hard anodized. the weight difference between the factory and GHW release in negligible. We really like the new Scorpion mag release and we think you will too. If you would like to learn more about the new paddle mag release from Gear Head Works, or you would like to get one for your CZ Scorpion check out their website here:
Brian at Homeland Guns “Link Here” Was able to get us one of the first production Kel Tec RDB bullpup rifles on the market to play with. So far the new RDB is a winner, we had no real malfunctions except one magazine failed to lock the bolt open on the last round. The RDB is fully ambidextrous with a bolt release & selector on both sides of the gun and a truly ambi magazine release, similar to the Tavor mag release. The new bullpup also has a charging handle that is non-reciprocating and can be placed on either the right or left side of the weapon. The barrel is a 17.4″ with a 1-7 twist, which is different from some of the pre production rifles that were 1-9. I really have to give it to Kel Tec on the new RDB, it is everything that we hoped it would be. If you would like to learn more about the new Kel Tec RDB check out their website Here